Follow

How do I reboot or restart a kiosk?

TA13R-I Kiosks

Power On

The device's power button can be reached through the casing using a small object such as a paperclip. The small hole is located on the top of the frame on the left side. Insert a small object (paperclip) to press the power button and turn the device on.

Force a Restart

The device's power button can be reached through the casing using a small object such as a paperclip.

Step 1: Press and hold the power button for 30 seconds. The screen may flash, but continue to hold down the power button for the full 30 seconds. After the full 30 seconds, release the power button.

Step 2: Press and release the power button again to turn it back on.

 

Two-button Shutdown and Reboot
Step 1: Press and hold the power button for 30 seconds and then release it.

Step 2: Press and hold the volume-up button and the power button at the same time for at least 15 seconds and then release both. The screen may flash a logo, but continue holding the buttons down for at least 15 seconds.

Step 3: After you release the buttons, wait 10 seconds.
Step 4: Press and release the power button to turn your device back on.
Step 5: Select "Exit Setup" on the screen.

Step 7: Select "Yes" on the popup. Your device will boot back up.

 

 

Hardened Kiosks 

Reboot Device

The device's power button can be reached through the casing using a small object such as a paperclip. The hole to reach the power button is located on the front of the casing, at the bottom, furthest to the right.

Step 1: Press and hold the power button until the device shuts down. Release.
Step 2: Wait 15 seconds.
Step 3: Press and hold the power button until a logo appears on the screen.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk